> For the complete documentation index, see [llms.txt](https://infinity-tech-1.gitbook.io/infinity-spoofer/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://infinity-tech-1.gitbook.io/infinity-spoofer/english/spoof-hwid.md).

# SPOOF HWID

Go to the Checker tab and save all the information there

Go to the Spoofer tab, Then click <mark style="color:red;">**Start**</mark> and wait for the process to complete

When the Spoofer is complete, your PC will restart automatically,

Check that your serials have been changed, to do this, open spoofer and go to the checker tab, all serials should be green

**CHECK THAT ALL YOUR SERIALS HAVE CHANGED, TO DO THIS, OPEN SPOOFER AND GO TO CHECKER**

**ALL THE INFORMATION SHOULD BE&#x20;**<mark style="color:green;">**GREEN**</mark><br>

<figure><img src="/files/RqhkMBucEbWME2OAwYhx" alt=""><figcaption></figcaption></figure>

*If any are red, please consult support*

<details>

<summary>SPOOF MAC</summary>

### Download TMAC <a href="#download-tmac" id="download-tmac"></a>

1. Download TMAC [here](https://pespcommunity.com/TMAC.zip)
2. Unzip the file
3. Run **TMAC\_setup.exe**

### Spoof MAC <a href="#spoof-mac-1" id="spoof-mac-1"></a>

1. Run **TMAC**
2. Select a network connection and click **Random MAC Address** and then click **Change Now**
3. Repeat this for all of your networks

### Disable unused adapters <a href="#disable-unused-adapters" id="disable-unused-adapters"></a>

1. Press **Win + R**, type `ncpa.cpl` and click **OK**

![](/files/hMLDR6czntNyrsixq2Ld)

2. Remember the name of the active connection
3. Right-click the Windows logo, select **Device Manager**
4. Right-click and select **Disable device** on all other Network adapters

![](/files/QbdVhkXXvLcREQBy5qAh)

### Change adapter properties <a href="#change-adapter-properties" id="change-adapter-properties"></a>

1. Press **Win + R**, type `ncpa.cpl` and click **OK**

![](/files/UO7mFtJHhNYhvb6h0vlI)

2. Right-click your active connection and click on **Properties**
3. Configure it as shown below:

![](/files/xFaqotf6RWETd1DH8n7S)

4. Click **Configure**
5. Switch to **Advanced** and configure the following properties:

```
Advanced EEE - Disabled
ARP Offload - Disabled
Flow Control - Disabled
IPv4 Checksum Offload - Disabled
Large Send offload v2 (IPv6) - Disabled
Network Address - Not Present
TCP Checksum Offload (IPv6 ) - Disabled
UDP Checksum Offload (IPv6 ) - Disabled
```

</details>

{% hint style="info" %}
After you have done all these steps listed above you are ready to play again without a ban. Enjoy!
{% endhint %}

{% hint style="danger" %}
Remember to use [Vanguard Bypass](/infinity-spoofer/english/vanguad-bypass.md) or you'll be banned from valorant again!
{% endhint %}